Well, I sketched out some initial designs last night and this afternoon.
#1 Gimli Axe Knife is a knife version of the walking axe that Gimli used in the film:
#2 Hatchet Knife is as close as I could get to a knife-hybrid hatchet that doesn't seem too much like one or the other.
#3 Dwarven Bowie seemed like plain enough, no-nonsense design
#4 Mountain Seax - I had a lot of suggestions for a seax design. I figured something dwarven would be a bit on the robust side, so this design calls for a blade 2" to 2.5" wide
#5 Goblin Chopper - while I was initially less than enthused about tanto points, this kind of design might actually work.
#6 Dwarven Recurve - this started out as a T.B. Tracker design, but I didn't like it, so I modified it into a recurve. I'm not sure about this one.
#7 Spelunk Fighter - I got suggestions for a leuku design, too. Like the seax, I thought a dwarven version would be fairly robust, hence the wide blade.
#8 - Miner's Companion - I had a suggestion for a utility (non-fighter) knife, that uses a chisel point and grind (for prying stones & gems) and has a hammer pommel (for driving pitons). I also decided to add a saw blade and rope cutter on the spine.
************************
Now, a lot of these accessories can be mixed around:
Handle: I've kept to an octagonal handle design, however some use a straight handle with flared ends and some use a slightly curved octagonal handle. I could put either kind of handle on any of these blades.
Accents: I showed one blade with runes, another with a geometric design, and another with an engraving of the hammer and anvil design which Tolkien drew on the Moria Gate. I could put any of these, or something different, on any of the blade designs.
Rope Cutter: Could be added to any design
Saw Blade: Ditto
*************************
So, now that I have some designs sketched, what design or combination of designs might work?
Any other modification suggestions- handle, hilt, pommel, blade, etc?
Any other designs different from what I've already drawn?